KAS - 001 - KAS board, cable, instructions.jpg
305.83 KB

KAS - 002 - wires attached to KAS chip.JPG
301.05 KB

KAS - 003 - wires attached to KAS chip.JPG
343.99 KB

KAS - 004 - KAS board remounted.JPG
337.07 KB

Kenton board all hooked up.jpg
375.10 KB

MIDI - 001 - it's not too late.jpg
222.88 KB

MIDI - 002 - Measure twice.jpg
324.53 KB

MIDI - 003 - Drill twice.jpg
311.42 KB

MIDI - 004 - connectors soldered on.jpg
317.72 KB

MIDI - 005 - connectors screwed in.jpg
262.87 KB

MIDI - 006 - making labels.jpg
218.94 KB

MIDI - 007 - another label.jpg
169.70 KB

MIDI - 008 - labels done.jpg
308.21 KB

MIDI - 009 - labels done.jpg
349.95 KB

MIDI - 010 - from the inside.jpg
404.17 KB

MIDI - 011 - all tied down.jpg
390.20 KB

OPEN UP - 001 - Before anything.JPG
263.82 KB

OPEN UP - 002 - opened up.JPG
373.19 KB

OPEN UP - 003 - opened up.JPG
381.92 KB

OPEN UP - 004 - opened up.JPG
424.30 KB

OPEN UP - 005 - opened up.JPG
346.92 KB

OPEN UP - 006 - opened up.JPG
295.43 KB

OPEN UP - 007 - card cage up.JPG
345.57 KB

OPEN UP - 008 - card cage up.JPG
378.06 KB

OPEN UP - 009 - card cage up.JPG
459.21 KB

OPEN UP - 010 - keyboard up.JPG
353.68 KB

OPEN UP - 011 - keyboard up.JPG
364.04 KB

OPEN UP - 012 - keyboard up.JPG
394.48 KB

OPEN UP - 016 - keyframe pivot.jpg
292.13 KB

OPEN UP - 017 - keyframe pivot.jpg
258.46 KB

OPEN UP - 018 - keyframe pivot.jpg
301.31 KB

PANEL_BA_PRA - 001 - The cable for tonight.JPG
258.34 KB

PANEL_BA_PRA - 002 - Sustain and Portamento pots.JPG
320.38 KB

PANEL_BA_PRA - 003 - Old wires removed, new wires attached.JPG
346.33 KB

PANEL_BA_PRA - 004 - LFO pots.JPG
199.54 KB

PANEL_BA_PRA - 005 - New wiring.JPG
201.99 KB

PANEL_BA_PRA - 006 - BA board.JPG
390.83 KB

PANEL_BA_PRA - 007 - Just like the picture!.JPG
290.12 KB

PANEL_BA_PRA - 008 - tie down wire.JPG
363.04 KB

PANEL_BA_PRA - 009 - PRA board.JPG
324.25 KB

PANEL_BA_PRA - 010 - Which resistor lead to cut.JPG
349.82 KB

PANEL_BA_PRA - 011 - New wire on resistor.JPG
298.79 KB

PANEL_BA_PRA - 012 - wires going everywhere.JPG
411.05 KB

PANEL_BA_PRA - 013 - wires strapped down.JPG
339.69 KB

PRESETS - 001 - cable and instructions.JPG
279.23 KB

PRESETS - 002 - all hooked up like a sculpture.JPG
276.41 KB

PS - 001 - power supply apart.JPG
343.55 KB

PS - 002 - power supply apart.JPG
291.04 KB

PS - 003 - new wires to power supply.JPG
302.32 KB

PS - 004 - new wires to power supply.JPG
345.96 KB

PS - 005 - new wires to power supply.JPG
360.25 KB

PS - 006 - new wires to power supply.JPG
320.61 KB

PS - 007 - where to mount switches.JPG
244.87 KB

PS - 008 - pilot holes.JPG
308.77 KB

PS - 009 - drill big holes (ouch!).JPG
255.40 KB

PS - 010 - chisel square hole.JPG
326.90 KB

PS - 011 - chisel square hole.JPG
255.16 KB

PS - 012 - switches mounted.jpg
188.78 KB

PS - 013 - good thing I put down a cloth!.jpg
268.02 KB

PS - 014 - switches mounted.jpg
305.15 KB

PS - 015 - all strapped down.jpg
366.58 KB

PS - 015 - wires to new switches.jpg
207.15 KB

TKC - 001 - TKC board.JPG
303.00 KB

TKC - 002 - cut jumper wire.JPG
351.40 KB

TKC - 003 - cut jumper wire.JPG
377.28 KB

TKC - 004 - all wires attached.JPG
243.29 KB

TKC - 005 - closeups of wires.JPG
348.84 KB

TKC - 006 - closeups of wires.JPG
340.13 KB

TKC - 007 - closeups of wires.JPG
343.86 KB

TKC - 008 - all put back with cable routed.jpg
386.17 KB